Product
Clamp On Earth Tester - Hioki FT6380
The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A.
Rp.15.700.000
See Details
Earth Tester - Hioki FT6031-03
Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole ground resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.
Rp.6.400.000
See Details
Black body Calibration Source - Hotech 390
HOTECH 391 Blackbody Calibrator, a great performance calibration system, is design for calibrating infrared pyrometers. This series is special designed with wide open aperture and deep cavity which provides the excellent result of emissivity. Model 391 is available functioned within the broad temperature range of 100 to 700°C. Moreover, wide open aperture design has ability to provide a steady, repeatable calibration point which allows the user ease to calibrate most infrared pyrometers quickly and accurately. The deep prolong cavity offer high emissivity enabling the user to calibrate virtually with any infrared pyrometer with a 60 mm diameter aperture. This model has the option to choose the additional compunction module which able to communicate with applying RS-232, 422, or 485 computer interface.
Rp.123
See Details
Black body Calibration Source - Hotech 385
The Model 385 is a non-contact infrared thermometer calibrator which has the special designed concentric circles wavy surface that provides the excellent result of emissive. This model has the broad range of 50 to 500°C. Moreover; it has ability to provide a steady, repeatable calibration point which allows the user to calibrate or test most infrared pyrometers quickly and accurately. The target plate has a known emissive enabling the user to calibrate virtually with any infrared pyrometer with a spot size diameter of 110 mm . All models have an optional communications interface for computer formats to choose from; external control and record temperature set temperature.
Rp.123
See Details
Infrared Tympanic Thermometer Calibration Blackbody - Hotech 336
Infrared Tympanic Thermometer Calibration Blackbody from Hotech model 3301 offers the precise and stabilized temperature reference that allows the lab or manufacturer performs the service of temperature calibration. Model 3301 is specially design to follows with ASTM standard. Internal blackbody structure was uniquely designed to generates high infrared emissivity with the temperature stability of ±0.015°C @ 37°C, stable and constant temperature is guaranteed; moreover, it can be re-tune to get the best control if it is under the diversity ambient temperature
Rp.195.000.000
See Details
Infrared Tympanic Thermometer Calibration Blackbody - Hotech 3301
Infrared Tympanic Thermometer Calibration Blackbody from Hotech model 3301 offers the precise and stabilized temperature reference that allows the lab or manufacturer performs the service of temperature calibration. Model 3301 is specially design to follows with ASTM standard. Internal blackbody structure was uniquely designed to generates high infrared emissivity with the temperature stability of ±0.03°C @ 37°C, stable and constant temperature is guaranteed; moreover, it can be re-tune to get the best control if it is under the diversity ambient temperature.
Rp.168.700.000
See Details
Electric Pump and Booster - Additel 780-1K-EPUMP
ADT780-1K-EPUMP air pressure source uses electric driven pump to generate positive pressure and vacuum pressure. It can generate -13.5 psi (-0.95 bar ) vacuum and 1080 psi (75 bar ) pressure. with two independent control and ressure generation systems, vacuum and pressure can run simultaneously. this system supplies a steady and reliable air source for Additel 780 Pressure Controller.
Rp.123
See Details
Dumas Nitrogen Analyzer - VELP NDA 701
A powerful Dumas Protein/Nitrogen Analyzer, able to perform precise nitrogen analysis and protein determination in a flash. It is the best solution for high productivity and offers unique benefits, being totally unsupervised. NDA 701 is the innovative VELP Scientifica solution for nitrogen/protein determination, using the Dumas method (also known as combustion method) and offering on both solid and liquid samples. In Dumas combustion method the the encapsulated sample is burnt at a high temperature, in the presence of catalysts in a controlled oxygen atmosphere. The combustion gas, CO2 , H2O, NOx , passes through the reduction furnace where NOx are reduced to N2 . The H2O and CO2 are separated and the elemental nitrogen is measured with a Thermal Conductivity Detector (TCD). The whole procedure takes from 3 to 4 minutes.
Rp.123
See Details
Dual Carrier Gas Dumas Nitrogen Analyzer - VELP NDA 702
A versatile Dumas Protein/Nitrogen Analyzer, able to perform precise nitrogen analysis and protein determination using either Helium or Argon as carrier gas. Ideal for markets where Helium is scarce, it offers high throughput and precision. NDA 702 is a new conception nitrogen/protein Dumas analyzer, ensuring excellent performance on both solid and liquid samples and equipped with the TEMS™ technology. NDA 702 gives the possibility to choose between Helium or Argon, without the need for replacing any part. After years of increasing prices and supply chain interruptions, obtaining Helium, the conventional carrier gas, has become more and more difficult and expensive, especially in some countries. The desire to replace Helium with a more easily accessible carrier gas has intensified and become reality.
Rp.123
See Details
True RMS AC Clamp Meter With IR Thermometer - Extech EX820
The EX820 True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 degrees Fahrenheit (-50 to 270 degrees Celsius). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7 in. jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off. Other functions include AC/DC voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX830
The EX830 clamp meter features a unique, built-in, non-contact Infrared thermometer with laser pointer to monitor temperature and locate hot spots on motors and electrical devices. A large 4000 count LCD display with bright back lighting allows you to see the reading in dim light. The ergonomically designed double-molded housing offers a better grip for one-hand operation. The 1.7 Ft. (43 mm) diameter jaw opening is large enough for conductors up to 750MCM. In addition to AC/DC current, it measures AC/DC voltage, resistance, temperature, capacitance, and frequency.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX840
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details