Product
Moisture Analyzer – Ohaus MB23
The new OHAUS MB23 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB23 offer dependable, accurate, results for a wide variety of applications. The OHAUS MB23 provide accurate results at 0.1% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements
Rp.42.800.000
See Details
Moisture Analyzer – Ohaus MB25
The new OHAUS MB25 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB25 offer dependable, accurate, results for a wide variety of applications. The OHAUS MB25 provide accurate results at 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements
Rp.47.500.000
See Details
Xray Dosimetry System - Fluke RaySafe X2
RaySafe X2 Solo is a new product line from RaySafe that covers the measurement needs of your specific X-ray modalities. It’s based on the same technology as RaySafe X2, highly esteemed for its user-friendliness and performance, but instead of multi-modality capability, each model meets specific needs. Within your X-ray modalities the X2 Solo will meet all your QA or service measurement needs
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA609
The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing. The ESA609 integrates all functions needed to test medical devices when patient lead testing is not required, including: line (mains) voltage, ground wire (protective earth) resistance, equipment current, leakage current and point-to point tests. Versatile to global electrical safety standards of choice, the ESA609 tests to ANSI/AAMI ES1, NFPA-99, and parts of IEC62353 and IEC60601-1
Rp.123
See Details
Mdical Electrical Safety Analyzer – Fluke ESA612
The ESA612 Electrical Safety Analyzer represents the next generation in test equipment for biomedical and clinical engineering professionals that perform field service on medical equipment throughout their facilities, in clinics, and anywhere onsite service is required. Portable, lightweight, and designed for operation in tight spaces, the ESA612 offers the functionality of a simulator, multimeter and electrical safety tester in a single test tool
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA615
The ESA615 Electrical Safety Analyzer brings fast and simple automated testing in the form of a portable analyzer to healthcare technology management professionals that perform electrical safety testing on medical equipment both in the field and in facilities. Whether it is simple testing or comprehensive analysis, the ESA615 can do it all. This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and lead (patient) leakage tests
Rp.123
See Details
Medical Electrical Safety Analyzer – Fluke ESA620
The ESA620 Electrical Safety Analyzer represents the next generation in portable, manual test tool for the biomedical technician and clinical engineer that are performing tests on medical equipment. With selections of three test loads, protective earth test currents, and two insulation test voltages this versatile product can be used worldwide to test to their standard of choice.New DSP technology offers better accuracy of leakage measurements throughout the ranges specified in the standards, and an intuitive interface guides the user through tests. The ESA620 features a large display to facilitate quick and clear indication of performed tests, criteria associated with test set up, device under test receptacle conditions and results
Rp.123
See Details
Precision Humidity and Temperature Calibrator – Kaymont 2000SPAX
The field proven M2000SP with new solid state electronics for high accuracy and performance over the full operating range of humidity and temperature. The temperature compensated control probe provides higher accuracy over the range of measurement. Newly designed electronics is incorporated within the heat/cool circuitry and a more efficient peltier mechanism, has been incorporated for faster response and temperature stability. The number of ports in the chamber door has been increased to accept 5 probes with diameters of 10mm, 12mm, 15mm and 18mm. NVLAP Accredited calibration of control probe. System tested for performance at ICH guideline parameters to meet accuracy and long term stability requirements. Typical response time is 3 minutes for 70%RH step change
Rp.123
See Details
Precision Humidity and Temperature Calibrator - Kaymont 2000SP
The Model 2000 is a low cost, high accuracy alternative to RH calibrations that use chilled mirror or 2-pressure systems, and is faster than procedures using saturated salts. The system incorporates advanced electronics and innovative approaches resulting in an overall improvement in performance and reliability. The system design provides a capability to perform calibrations of chart recorders with remote probes or do a simultaneous linearity test of multiple data loggers. The Model 2000 can also be used for a fast assessment of dew point instruments. The Model 2000 measures and controls RH directly. This eliminates the need for any conversions or computations that often lead to additional errors
Rp.123
See Details
Digital Tachometer – Hioki FT3405
The Hioki FT3405 and FT3406 are portable, contactless digital tachometers that use reflected visible spectrum light to measure the speed of a rotating object to which reflective tape has been affixed. The instruments can also be used as a contact-type tachometer by attaching the Z5003 Contact Adapter. Contactless performance ensures safety and peace of mind when measuring rotating objects that are recessed inside equipment or whose movement poses a hazard. Simply apply reflective tape to the object being measured, point the instrument at the tape, and press the button
Rp.11.000.000
See Details
Digital Tachometer – Hioki FT3406
The Hioki FT3405 and FT3406 are portable, contactless digital tachometers that use reflected visible spectrum light to measure the speed of a rotating object to which reflective tape has been affixed. The instruments can also be used as a contact-type tachometer by attaching the Z5003 Contact Adapter. Contactless performance ensures safety and peace of mind when measuring rotating objects that are recessed inside equipment or whose movement poses a hazard. Simply apply reflective tape to the object being measured, point the instrument at the tape, and press the button
Rp.12.500.000
See Details
Laboratory Microscope – Euromex iScope
The excellent optics and mechanical components make the iScope® a state of-the art microscope that is suitable for fluorescence applications in Life Science and Biotechnical fields The iScope® fluorescence microscope can be supplied with : 6-position rotating attachment with 100 W mercury vapor light source, 3-position slider attachment with 100 W mercury vapor light source, 1-position slider attachment with a 3 W NeoLED™ 465-475 nm blue light source and 1-position slider attachment with a 3 W NeoLED™ 520-530 nm green light source
Rp.123
See Details