Product
Precision Multifunction Process Calibrator – Fluke 726
The Fluke 726 precision multifunction process calibrator is designed specifically for the process industry with broad workload coverage, calibration power and unsurpassed accuracy. The Fluke 726 measures and sources almost all process parameters and can calibrate almost anything. Additionally, this Fluke multifunction process calibrator will interpret results without the help of a calculator and stores measurement data for further analysis. Two separate channels allow the Fluke 726 to measure, source and view process signals simultaneously
Rp.72.500.000
See Details
Digital Multimeter - Fluke 101
Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.
Rp.123
See Details
Multifunction Process Calibrator – Fluke 725
The Fluke 725 Multifunction Process Calibrator can test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency and ohms. From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls (without menus), make operation easy. The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
Rp.70.600.000
See Details
Process Meter - Fluke 789
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™ with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.
Rp.22.800.000
See Details
Camera Digital - Olympus DP23
The DP22 is a 2.8 megapixel digital camera for microscopes that offers stunning color and crisp detail with a smooth 15 frames per second, perfect for users without access or the desire to use a PC. DP22 has the power to display images over high-definition at a smooth 25 frames per second. The stunning colors, crisp images and real-time display address the fundamental needs of industrial departments such as inspection and quality control. DP22 cameras can be used as a complete stand-alone model (no PC required). It is an ideal selection when precious bench space is limited. The camera is controlled from a dedicated control box providing smooth and intuitive operation via a touchscreen monitor or a mouse.
Rp.185.000.000
See Details
Camera Digital - Olympus DP28
The DP27 is a 5 megapixel digital camera for microscopy with high-fidelity color reproduction and progressive scanning free from color shift, providing live images with superb quality, seamlessly integrated into the OLYMPUS Stream analysis. Equipped with an industry leading 5-megapixel CCD, the micro imaging digital camera, DP27 captures images at up to 2448 x 1920-pixel resolution－allowing large fields of view captured at low magnification providing vivid clarity with images remaining clear even when digitally enlarged. The DP27 is ideally suited to be used for visual inspection,with near real time imaging. Its color fidelity provides faithful color reproduction for a variety of samples in such diverse fields as materials science, semiconductor and electronics.
Rp.263.000.000
See Details
Camera Digital - Olympus DP74
The DP74 color camera supports advanced functions to capture high-quality images of samples. The camera combines a wide field of view with a diagonal length of 21 mm with full HD image resolution at 60 frames per second (fps). The Global shutter of the DP74's CMOS expose the whole pixel at same time. Therefore, even in moving stage, there is no distortion like rolling shutter CMOS which expose and reads line by line. The result is that users can acquire images of sample quickly and easily. The DP74 camera is optimized for fluorescence imaging with a powerful noise reduction function and a high level of gain sensitivity. With the position navigator, you’ll always know your location in the sample, even without a motorized stage.
Rp.327.500.000
See Details
Clamp On Earth Tester - Hioki FT6380
The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A.
Rp.15.700.000
See Details
Earth Tester - Hioki FT6031-03
Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole ground resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.
Rp.6.400.000
See Details
Black body Calibration Source - Hotech 390
HOTECH 391 Blackbody Calibrator, a great performance calibration system, is design for calibrating infrared pyrometers. This series is special designed with wide open aperture and deep cavity which provides the excellent result of emissivity. Model 391 is available functioned within the broad temperature range of 100 to 700°C. Moreover, wide open aperture design has ability to provide a steady, repeatable calibration point which allows the user ease to calibrate most infrared pyrometers quickly and accurately. The deep prolong cavity offer high emissivity enabling the user to calibrate virtually with any infrared pyrometer with a 60 mm diameter aperture. This model has the option to choose the additional compunction module which able to communicate with applying RS-232, 422, or 485 computer interface.
Rp.123
See Details
Black body Calibration Source - Hotech 385
The Model 385 is a non-contact infrared thermometer calibrator which has the special designed concentric circles wavy surface that provides the excellent result of emissive. This model has the broad range of 50 to 500°C. Moreover; it has ability to provide a steady, repeatable calibration point which allows the user to calibrate or test most infrared pyrometers quickly and accurately. The target plate has a known emissive enabling the user to calibrate virtually with any infrared pyrometer with a spot size diameter of 110 mm . All models have an optional communications interface for computer formats to choose from; external control and record temperature set temperature.
Rp.123
See Details
Infrared Tympanic Thermometer Calibration Blackbody - Hotech 336
Infrared Tympanic Thermometer Calibration Blackbody from Hotech model 3301 offers the precise and stabilized temperature reference that allows the lab or manufacturer performs the service of temperature calibration. Model 3301 is specially design to follows with ASTM standard. Internal blackbody structure was uniquely designed to generates high infrared emissivity with the temperature stability of ±0.015°C @ 37°C, stable and constant temperature is guaranteed; moreover, it can be re-tune to get the best control if it is under the diversity ambient temperature
Rp.195.000.000
See Details