Product
Infrared Tympanic Thermometer Calibration Blackbody - Hotech 3301
Infrared Tympanic Thermometer Calibration Blackbody from Hotech model 3301 offers the precise and stabilized temperature reference that allows the lab or manufacturer performs the service of temperature calibration. Model 3301 is specially design to follows with ASTM standard. Internal blackbody structure was uniquely designed to generates high infrared emissivity with the temperature stability of ±0.03°C @ 37°C, stable and constant temperature is guaranteed; moreover, it can be re-tune to get the best control if it is under the diversity ambient temperature.
Rp.168.700.000
See Details
Electric Pump and Booster - Additel 780-1K-EPUMP
ADT780-1K-EPUMP air pressure source uses electric driven pump to generate positive pressure and vacuum pressure. It can generate -13.5 psi (-0.95 bar ) vacuum and 1080 psi (75 bar ) pressure. with two independent control and ressure generation systems, vacuum and pressure can run simultaneously. this system supplies a steady and reliable air source for Additel 780 Pressure Controller.
Rp.123
See Details
Dumas Nitrogen Analyzer - VELP NDA 701
A powerful Dumas Protein/Nitrogen Analyzer, able to perform precise nitrogen analysis and protein determination in a flash. It is the best solution for high productivity and offers unique benefits, being totally unsupervised. NDA 701 is the innovative VELP Scientifica solution for nitrogen/protein determination, using the Dumas method (also known as combustion method) and offering on both solid and liquid samples. In Dumas combustion method the the encapsulated sample is burnt at a high temperature, in the presence of catalysts in a controlled oxygen atmosphere. The combustion gas, CO2 , H2O, NOx , passes through the reduction furnace where NOx are reduced to N2 . The H2O and CO2 are separated and the elemental nitrogen is measured with a Thermal Conductivity Detector (TCD). The whole procedure takes from 3 to 4 minutes.
Rp.123
See Details
Dual Carrier Gas Dumas Nitrogen Analyzer - VELP NDA 702
A versatile Dumas Protein/Nitrogen Analyzer, able to perform precise nitrogen analysis and protein determination using either Helium or Argon as carrier gas. Ideal for markets where Helium is scarce, it offers high throughput and precision. NDA 702 is a new conception nitrogen/protein Dumas analyzer, ensuring excellent performance on both solid and liquid samples and equipped with the TEMS™ technology. NDA 702 gives the possibility to choose between Helium or Argon, without the need for replacing any part. After years of increasing prices and supply chain interruptions, obtaining Helium, the conventional carrier gas, has become more and more difficult and expensive, especially in some countries. The desire to replace Helium with a more easily accessible carrier gas has intensified and become reality.
Rp.123
See Details
True RMS AC Clamp Meter With IR Thermometer - Extech EX820
The EX820 True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 degrees Fahrenheit (-50 to 270 degrees Celsius). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7 in. jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off. Other functions include AC/DC voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX830
The EX830 clamp meter features a unique, built-in, non-contact Infrared thermometer with laser pointer to monitor temperature and locate hot spots on motors and electrical devices. A large 4000 count LCD display with bright back lighting allows you to see the reading in dim light. The ergonomically designed double-molded housing offers a better grip for one-hand operation. The 1.7 Ft. (43 mm) diameter jaw opening is large enough for conductors up to 750MCM. In addition to AC/DC current, it measures AC/DC voltage, resistance, temperature, capacitance, and frequency.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX840
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details
BOD Self Check Measurement - WTW Oxitop IS6
Measurement using OxiTop® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxygen and form CO2; the CO2 is absorbed by NaOH, creating a vacuum that can be measured as a mg/l BOD value. The sample volume used regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can be measured using different volumes.
Rp.65.800.000
See Details
BOD Self Check Measurement - WTW Oxitop IS12
Measurement using OxiTop® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxygen and form CO2; the CO2 is absorbed by NaOH, creating a vacuum that can be measured as a mg/l BOD value. The sample volume used regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can be measured using different volumes.
Rp.94.500.000
See Details
BOD Trak II Respirometric - Hach BOD Apparatus
Simplify BOD analysis with the BODTrak™II Respirometric BOD Apparatus. Results comparable to the dilution method can be achieved in only two to three days. Use these results for process control or as a complement to the dilution method (not approved by USEPA for NPDES reporting purposes). The BODTrak II is a re-engineered version of the original Hach BODTrak. Improvements to the old system include greaseless bottle seals, a larger graphical display, improved stirring and temperature control, a smaller footprint, improved procedures with expanded options, an auto-switching power supply, and bottle fences to prevent tipping of bottles.
Rp.128.000.000
See Details
Spectrophotometer - WTW SpectroFlex 6100
WTW photometers are distinguished for their instruments supporting Analytical Quality Assurance (AQA). User friendly operation for chekking the instrument and test kits for single users are supported as well as an extensive user administration for a multiple user environment. The AQA can be switched-on or switched-off optionally; the procedure is interval-controlled. SpectroFlex 6100 is designed for use in the VIS range from 320 to 1100 nm and offers the best optical performance in its class. It is ideal for water analysis with commercial test kits and education – also with scan functions for absorbance and kinetics measurement.
Rp.123
See Details
Spectrophotometer - WTW SpectroFlex 6600
WTW photometers are distinguished for their instruments supporting Analytical Quality Assurance (AQA). User friendly operation for chekking the instrument and test kits for single users are supported as well as an extensive user administration for a multiple user environment. The AQA can be switched-on or switched-off optionally; the procedure is interval-controlled. SpectroFlex 6600 with a wavelength range from 190 to 1100 nm is designed to cover all applications in the complete UV-VIS range and – besides the systematic analysis – also the measurement of absorbance scans and kinetics. Thus, the spectroFlex 6600 is an excellent choice not only for water analysis and service labs but also for teaching and research.
Rp.120.000.000
See Details