Product
True RMS AC Clamp Meter With IR Thermometer - Extech EX820
The EX820 True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 degrees Fahrenheit (-50 to 270 degrees Celsius). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7 in. jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off. Other functions include AC/DC voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX830
The EX830 clamp meter features a unique, built-in, non-contact Infrared thermometer with laser pointer to monitor temperature and locate hot spots on motors and electrical devices. A large 4000 count LCD display with bright back lighting allows you to see the reading in dim light. The ergonomically designed double-molded housing offers a better grip for one-hand operation. The 1.7 Ft. (43 mm) diameter jaw opening is large enough for conductors up to 750MCM. In addition to AC/DC current, it measures AC/DC voltage, resistance, temperature, capacitance, and frequency.
Rp.123
See Details
True RMS AC DC Clamp Meter With IR Thermometer - Extech EX840
This CAT IV True RMS clamp meter features a built-in IR thermometer with laser pointer for non-contact surface measurements from -58 to 518 °F (-50 to 270 °C). Clamp measures AC current up to 1000 Amp with a maximum resolution of 0.1 Amp. The 1.7-inch jaw fits around conductors up to 750MCM. Peak hold captures motor inrush currents and other surges. Data hold and auto power off functions. Other functions include AC/DC Voltage, resistance, Type K thermometer, capacitance and frequency. Complete with test leads, Type K temperature probe, 9 Volt battery and case.
Rp.123
See Details
BOD Self Check Measurement - WTW Oxitop IS6
Measurement using OxiTop® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxygen and form CO2; the CO2 is absorbed by NaOH, creating a vacuum that can be measured as a mg/l BOD value. The sample volume used regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can be measured using different volumes.
Rp.65.800.000
See Details
BOD Self Check Measurement - WTW Oxitop IS12
Measurement using OxiTop® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxygen and form CO2; the CO2 is absorbed by NaOH, creating a vacuum that can be measured as a mg/l BOD value. The sample volume used regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can be measured using different volumes.
Rp.94.500.000
See Details
BOD Trak II Respirometric - Hach BOD Apparatus
Simplify BOD analysis with the BODTrak™II Respirometric BOD Apparatus. Results comparable to the dilution method can be achieved in only two to three days. Use these results for process control or as a complement to the dilution method (not approved by USEPA for NPDES reporting purposes). The BODTrak II is a re-engineered version of the original Hach BODTrak. Improvements to the old system include greaseless bottle seals, a larger graphical display, improved stirring and temperature control, a smaller footprint, improved procedures with expanded options, an auto-switching power supply, and bottle fences to prevent tipping of bottles.
Rp.128.000.000
See Details
Spectrophotometer - WTW SpectroFlex 6100
WTW photometers are distinguished for their instruments supporting Analytical Quality Assurance (AQA). User friendly operation for chekking the instrument and test kits for single users are supported as well as an extensive user administration for a multiple user environment. The AQA can be switched-on or switched-off optionally; the procedure is interval-controlled. SpectroFlex 6100 is designed for use in the VIS range from 320 to 1100 nm and offers the best optical performance in its class. It is ideal for water analysis with commercial test kits and education – also with scan functions for absorbance and kinetics measurement.
Rp.123
See Details
Spectrophotometer - WTW SpectroFlex 6600
WTW photometers are distinguished for their instruments supporting Analytical Quality Assurance (AQA). User friendly operation for chekking the instrument and test kits for single users are supported as well as an extensive user administration for a multiple user environment. The AQA can be switched-on or switched-off optionally; the procedure is interval-controlled. SpectroFlex 6600 with a wavelength range from 190 to 1100 nm is designed to cover all applications in the complete UV-VIS range and – besides the systematic analysis – also the measurement of absorbance scans and kinetics. Thus, the spectroFlex 6600 is an excellent choice not only for water analysis and service labs but also for teaching and research.
Rp.120.000.000
See Details
Flue Gas Analyzer - Testo 310
The new flue gas analyzer testo 310 combines simple functions with a high level of masurement accuracy, and is therefore perfectly suited to all basic measurements on a heating system. Long battery lifetimes of up to ten hours guarantee high availability. Its easy handling and compact design make the testo 310 a robust tool for day-to-day work – even when things get rough. Clear reports can be created as required on site thanks to the infrared interface printer specially developed for the testo 310.
Rp.123
See Details
Highly Efficient Flue Gas Analyzer – Testo 320
The new testo 320 is a high-quality measuring instrument for efficient flue gas analysis. Its wide measuring range makes it a reliable partner for eliminating malfunctions and emergencies, monitoring legal limit values or for daily routine work servicing heating systems. The numerous measurement menus of the testo 320 are clearly structured. Standarized menu procedures, which are stored in the instrument specifically for your country, simplify operation – depending on which standards you are dealing with.
Rp.123
See Details
Professional Flue Gas Analyzer – Testo 330LL
The testo 330 LL is the professional flue gas analyzer. It fulfils the highest demands and can cope with all measurement tasks on heating systems. The high-quality instrument is especially excellent thanks to the successful combination of outstanding sensor technology, long life and security. It has three high-quality measuring cells for O2, CO and NO (optional) as well as a temperature probe integrated into the flue gas probe for the direct measurement of temperature, O2, CO and NO. The abbreviation „LL“ stands for „Longlife“. The sensors of the instrument series testo 330 LL have an extended lifetime of up to 6 years. At least one O2 and CO sensor replacement can be saved in the course of the typical working life.
Rp.123
See Details
Flue Gas Analyzer for Industry – Testo 340
The unique measuring range extension allows unrestricted measurements to be carried out even at high gas concentrations. The testo 340 is equipped with an O2 sensor as standard. Three further gas sensors can be configured individually, in order to be able to adapt the instrument optimally to the respective measurement task. The instrument can also be operated remotely from your Andrroid Smartphone or tablet using the free App. The compact design and the reliable technology make it the ideal measuring instrument for commissioning, service and maintenance work and in test measurements on industrial burners, stationary industrial engines, gas turbines and thermal processes.
Rp.123
See Details