This instrument can be utilized in order to control color from raw materials through the process of manufacturing. The CR-20 fits comfortably in the palm of your hand. It is both battery-operated and light-weight, so it is extremely portable. This unit can also be connected to an AC adapter for external power. This device is affordable and easy-to-use.The functionality of this instrument is user-friendly and does not perform any unneeded processes. This makes things simple. There are 3 easy steps to operate the CR-20, switch on power, perform white calibration, and measure the sample. All color measurements are taken using conditions of the standard illuminant D65 and 10 degrees observer while offering a Xenon lamp light source for longer life and more stable readings.
Illuminating/viewing geometry : 8° : de (8°illumination angle/diffuse viewing: specular component excluded) (conforms to DIN 5033 Teil 7, JIS Z 8722 condition d, ISO 7724/1, CIE No. 15, ASTM E 1164) Detector : Silicon photocells (6 pcs.) Light source : Pulsed xenon lamps Measurement time : Approx. 1 sec Battery performance : Approx. 2,000 measurement at 10-sec. intervals when using alkaline-manganese batteries Measurement area : Approx. : ø8 mm Repeatability : Standard deviation within ΔE*ab 0.1 (when a white calibration plate is measured 30 times at 10-second intervals) Display languages : English, Japanese Interface : USB2.0 Observer : 10° Standard Observer Illuminant : D65 Display data : Colorimetric data, average (up to 999 times) Color spaces : L*a*b*, L*C*h, Yxy, XYZ, Munsell (D65) Colorimetric Indexes : WI (CIE/ASTM E 313-96), Tint (CIE/ASTM E 313-96), YI (ASTM E 313-96) Data memory : Sample data (up to 1,000) Operation temperature/ humidity range : 0 to 40°C, relative humidity 85% or less (at 35°C) with no condensation Storage temperature/ humidity range : -20 to 40°C, relative humidity 85% or less (at 35°C) with no condensation Power : 4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries, USB bus power or special AC Adapter Size (W x H x D) : 66 x 159.5 x 85 mm Weight : 420 g (without batteries)
Spectrophotometer ST50 is a spectrophotometer developed by 3NH TS series core technology, using built-in photodiode array (double 20 groups) sensors, imported whiteboard, while taking into account the measurement speed and convenience of operation. The repeatability delta E* AB of ST50 spectrophotometer is easily controlled within 0.03, and the Inter-instrument error delta E* AB is controlled within 0.2, to make the measurement more accurate. And the test data can be used for accurate color analysis and transmission in the laboratory.
Spectrophotometer ST60 is a spectrophotometer developed by 3NH TS series core technology, using built-in photodiode array (double 26 groups) sensors, imported whiteboard, while taking into account the measurement speed and convenience of operation. The repeatability delta E* AB of ST60 spectrophotometer is easily controlled within 0.025, and the Inter-instrument error delta E* AB is controlled within 0.15, to make the measurement more accurate. And the test data can be used for accurate color analysis and transmission in the laboratory.
Spectrophotometer ST70 is a spectrophotometer developed by 3NH TS series core technology, using built-in photodiode array (double 32 groups) sensors, imported whiteboard, while taking into account the measurement speed and convenience of operation. The repeatability delta E* AB of ST70 spectrophotometer is easily controlled within 0.02, and the Inter-instrument error delta E* AB is controlled within 0.15, to make the measurement more accurate. And the test data can be used for accurate color analysis and transmission in the laboratory.