Automatically controlled changeover of the integrated flame and graphite furnace atomizer featuring easy operation and time-saving eliminate human labor. A flame emission burner head can be installed to perform flame emission analysis on Alkali metals such as K, Na, etc.
Spesifikasi: Main Specification: Wavelength range: 190-900nm Wavelength accuracy: Better than ±0.25nm Resolution: Two spectral lines of Mn at 279.5nm and 279.8nm can be separated with the spectral bandwidth of 0.2nm and valley-peak energy ratio less than 30%. Baseline stability: 0.004A/30min Background correction: The D2 lamp background correction capability at 1A is better than 30 times. The S-H background correction capability at 1.8A is better than 30 times. Light Source System: Lamp turret: Motorized 6-lamp turret (Two high performance HCLs can be mounted on the turret to increase the sensitivity in flame analysis.) Lamp current adjustment: Wide pulse current: 0~25mA, Narrow pulse current: 0~10mA. Lamp power supply mode: 400Hz square wave pulse; 100Hz narrow square wave pulse + 400Hz wide square pulse wave. Optical System: Monochomator: Single beam, Czerny-Turner design grating monochromator Grating 1800 l/mm Focal length: 277mm Blazed Wavelength: 250nm Spectral Bandwidth: 0.1nm, 0.2nm, 0.4nm, 1.2nm, auto switch over Dimensions and Weight: Main unit:107X49x58cm, 140kg Graphite furnace: 42X42X46cm, 65kg Autosampler: 40X29X29cm, 15kg
The K5800/K5800C nano spectrophotometer is a new full-wavelength ultra-micro spectrophotometer, which can be used to detect nucleic acids, proteins, cell solutions, microarray samples, and conventional full-wavelength scanning. At the same time, there are a dark room and a detection platform, and you can choose two measurement modes: cuvette and detection platform.
An atomic absorption spectrometer(AAS), also known as atomic absorption spectrophotometer, analyzes metal elements according to the effect of ground state atomic vapor on characteristic radiation absorption. It can determine trace or trace elements sensitively and reliably.
The wavelength dispersive X-ray fluorescence spectrometer (WDXRF) is a high-tech product developed by our company based on the experience and fruits of domestic R&D on similar instrument over years, and absorbing the international advanced technology, The technical performance indexes have reached the level of international similar products. It can be used in any field that requires analysis of elements or compounds from Na to U, such as building materials (cement, glass, ceramics), metallurgy (iron and steel, non-ferrous metals), petroleum (trace elements such as S, Pb, etc.), chemical industry, geological mining, commodity inspection, quality inspection and even human trace elements inspection and so on.