DW-TY-9000 is a Full Range of Solutions for the Entire Metals Industry. It uses full-digital technology to replace bulky photomultiplier tube (PMT) simulation technology and keep pace with international spectrometer technology. The adoption of a vacuum optical chamber design, full-digital excitation light source, advanced CCD detectors, and high-speed data readout system equips the device with high properties, ultra-low limit of detection (LOD), long-term stability, and repeatability.
Spesifikasi: Detection of substrate: Fe、Al、Cu、Ni、Ti、Co、Zn、Sn、Mg、Pb etc Testing time” According to the sample type, generally about 25s Optical system: The Paschen Runge construction full vaccum type optics system Wavelength coverage: 130~800nm Focal length: 400mm Detector: High-performance CCD Array Electrode: Tungsten material injection electrode Analytical gap: The sample analysis of clearance: 3.4mm Operating temperature: (10~35)℃ Storage temperature: (0~45)℃ Operating humidity: 20%~80% Argon purity requirements: 99.999% Argon gas inlet pressure : 0.5MPa Argon flow: Stimulate the flow around 3.5L/min,Maintain flow around 0.4L/min Stimulate the maximum power: 400VA Type of Lamp-house: New digital adjustable light, high energy precombustion technology(HEPS) Discharge frequency: 100-1000 Hz Discharge current: Maximum 400A Excitation aperture: 13mm Vacuum system: The vacuum automatic control and monitoring software Working power supply: 220V AC, 50/60Hz, single phase power supply for protective grounding Instrument size: 725*865*550(mm) Instrument weight: 80kg
The K5800/K5800C nano spectrophotometer is a new full-wavelength ultra-micro spectrophotometer, which can be used to detect nucleic acids, proteins, cell solutions, microarray samples, and conventional full-wavelength scanning. At the same time, there are a dark room and a detection platform, and you can choose two measurement modes: cuvette and detection platform.
An atomic absorption spectrometer(AAS), also known as atomic absorption spectrophotometer, analyzes metal elements according to the effect of ground state atomic vapor on characteristic radiation absorption. It can determine trace or trace elements sensitively and reliably.
The wavelength dispersive X-ray fluorescence spectrometer (WDXRF) is a high-tech product developed by our company based on the experience and fruits of domestic R&D on similar instrument over years, and absorbing the international advanced technology, The technical performance indexes have reached the level of international similar products. It can be used in any field that requires analysis of elements or compounds from Na to U, such as building materials (cement, glass, ceramics), metallurgy (iron and steel, non-ferrous metals), petroleum (trace elements such as S, Pb, etc.), chemical industry, geological mining, commodity inspection, quality inspection and even human trace elements inspection and so on.