The instrument has been widely applied in the fields including water quality, soil, atmospheric particulates, solid wastes, food, animals and plants, food-contact materials, cosmetics, semiconductor, high-purity materials, mineral products, petrochemical engineering, industrial products and textile, and meets the requirements of relevant national standard analysis methods.
Spesifikasi: Analysis speed: about 200 spectral lines each minute Sample consumption: only 2 ml *Determined spectral linear dynamic range: ≥105 (determined with Mn257.6nm, and the correlation coefficient ≥0.999) *Precision: determine 1 ppm or 10 ppm multi-element mixed standard solution; the RSD obtained after ten times of measurement ≤0.5% *Stability: determine 1 ppm or 10 ppm multi-element mixed standard solution; the long-time stability after continuous 2 hours’ measurement, RSD, ≤ less than 1%, and 4 hours’ long-time stability, RSD, ≤2% Detection limit: (Unit: ug/L; as per the elements specified in JJG768-2005) Preheating time : the duration from the standby status to plasma ignition shall be shorter than 20 minutes.
Gas Chromatography is a kind of instrument for qualitative and quantitative analysis of multicomponent complex mixture by using chromatographic separation technology and detection technology. Generally, it can be used to analyze the thermal stable organic compounds in soil, such as volatile organic compounds, organic chlorine, organic phosphorus, polycyclic aromatic hydrocarbons, phthalates, etc.
Gas Chromatography is a kind of instrument for qualitative and quantitative analysis of multicomponent complex mixture by using chromatographic separation technology and detection technology. Generally, it can be used to analyze the thermal stable organic compounds in soil, such as volatile organic compounds, organic chlorine, organic phosphorus, polycyclic aromatic hydrocarbons, phthalates, etc.
Liquid Chromatography uses the mixture in liquid-solid or immiscible between the two liquid distribution ratio differences, the mix of the first separation, then analysis and identification of the instrument.