The K5800/K5800C nano spectrophotometer is a new full-wavelength ultra-micro spectrophotometer, which can be used to detect nucleic acids, proteins, cell solutions, microarray samples, and conventional full-wavelength scanning. At the same time, there are a dark room and a detection platform, and you can choose two measurement modes: cuvette and detection platform.
Spesifikasi: Light source: long-life pulsed xenon flash lamp Detector: 2048-element linear silicide CCD array wavelength range: 190 ~ 850nm wavelength accuracy: ± 1nm Wavelength resolution: 2 nm (FWHM at Hg 546 nm) Repeatability: <± 0.5nm Lightpath: 1mm, 0.05mm (optical path automatic conversion) nucleic acid measurement range: 0.4 ~ 15000ng / μl (DS-DNA) Protein measurement range: 0.01 ~ 400mg / ml (BSA) sample volume requirements: 0.3 ~ 2 μL Absorbance Accuracy: 1% (0.76 absorbance at 350 nm) Absorbance range: 0.002 – 300 (equivalent to 10mm path length) cuvette mixing system: own mixing system so that the sample concentration is more uniform Sample measurement time: less than 5 seconds Sample base material: stainless steel and quartz fiber cuvette specifications (optical path): 1mm, 2mm, 5mm, 10mm The minimum sample volume of the cuvette: 20 μl Cuvette Type: A cuvette with a traceable cuvette specification Cuvette Anechoic Chamber: A standard cuvette darkroom with a wide variety of cuvettes mixing system: comes with a mixing system temperature control: 4 ~ 42 ℃ thermostat adjustable temperature error <± 0.5 ℃
The K5800/K5800C nano spectrophotometer is a new full-wavelength ultra-micro spectrophotometer, which can be used to detect nucleic acids, proteins, cell solutions, microarray samples, and conventional full-wavelength scanning. At the same time, there are a dark room and a detection platform, and you can choose two measurement modes: cuvette and detection platform.
An atomic absorption spectrometer(AAS), also known as atomic absorption spectrophotometer, analyzes metal elements according to the effect of ground state atomic vapor on characteristic radiation absorption. It can determine trace or trace elements sensitively and reliably.
The wavelength dispersive X-ray fluorescence spectrometer (WDXRF) is a high-tech product developed by our company based on the experience and fruits of domestic R&D on similar instrument over years, and absorbing the international advanced technology, The technical performance indexes have reached the level of international similar products. It can be used in any field that requires analysis of elements or compounds from Na to U, such as building materials (cement, glass, ceramics), metallurgy (iron and steel, non-ferrous metals), petroleum (trace elements such as S, Pb, etc.), chemical industry, geological mining, commodity inspection, quality inspection and even human trace elements inspection and so on.