Industrial Refrigerant Gas Detector – Bacharach MGS550
Bacharach’s advanced MGS-550 gas detector can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. The MGS-550 can easily be connected to any central control system using the current and volt analog output or the Modbus RTU interface. With three user assignable relays, it can also function as a stand-alone unit without the need to wire alarm devices back to a central system. The straightforward menu structure is identical throughout the platform reducing the amount of training required for installing and maintaining this product family
Rp.123
See Details
Flue Gas Analyzer - Bacharach PCA3
The PCA®3 is the perfect tool for busy technicians and boiler contractors who need to ensure safe operating conditions, determine combustion efficiency and perform emissions testing. Up to 4 sensors can be installed, measuring all gases simultaneously, including NOx (calculated from NO or measured from NO + NO2). Sensors can be added in the field without down time or replaced using B-Smart® pre-calibrated sensors. The PCA®3 calculates values like efficiency, CO2 and CO air-free to help monitor combustion processes effectively and accurately.
Rp.110.000.000
See Details
Flue Gas Analyzer – Bacharach ECA 450
The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently. The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD.
Rp.356.400.000
See Details
Flue Gas Analyzer – Bacharach Monoxor® Plus
The Monoxor® Plus is the perfect tool for home/safety inspectors, maintenance personnel and HVAC contractors who need to monitor CO in ambient air or stack gases. It has many advanced features, including a trending graph with real-time value displayed, minimum and maximum measured values, and ability to log a 15-minute CO ambient test. The CO sensor is quickly replaced in the field without down time using B-Smart® pre-calibrated sensors. The Monoxor® Plus can also be used to measure ambient and flue gas temperatures, using optional thermocouple accessories. There’s even an available NOx filter to provide more accurate CO readings in flue gas applications.
Rp.123
See Details
Single Gas Detector - Honeywell Gas Alert Extreme
Honeywell Gas Alert Extreme is single gas detector offers extended longevity with a two year field-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW Technologies by Honeywell's MicroDock II automatic test and calibration system. A wide range of user options, multi-language display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.
Rp.15.700.000
See Details
Single Gas Detector - Honeywell BW Clip
The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously — no need for calibration, sensor replacement,
battery replacement or battery charging. That means great reliability and no downtime. Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you’re not using it for a week or more — and extend its life by that period of time.
battery replacement or battery charging. That means great reliability and no downtime. Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you’re not using it for a week or more — and extend its life by that period of time.
Rp.15.400.000
See Details
Multi Gas Detector – Honeywell GasAlertMicroClip XL
The industrial GasAlertMicroClip is the world’s most popular multi-gas portable detector, delivering long runtime and reliability — plus small size, low cost and the easiest user experience. Plus, it’s the only multi-gas detector with a rating of IP68 for unmatched water protection — up to 45 minutes at a depth of 1.2 m. So you can be confident it will stand up to challenging conditions.
Rp.12.500.000
See Details
Multi Gas Detector – Honeywell GasAlertMicroClip X3
The industrial GasAlertMicroClip is the world’s most popular multi-gas portable detector, delivering long runtime and reliability — plus small size, low cost and the easiest user experience. Plus, it’s the only multi-gas detector with a rating of IP68 for unmatched water protection — up to 45 minutes at a depth of 1.2 m. So you can be confident it will stand up to challenging conditions.
Rp.13.700.000
See Details
Multi Gas Detector – Honeywell GasAlertQuattro
Rugged and reliable, the GasAlertQuattro four-gas detector combines a comprehensive range of features with simple one-button operation. With fl exible power options, the GasAlertQuattro is always ready. The graphic LCD displays easy to identify icons that indicate operational information, such as bump test and calibration status for simplifi ed onsite auditing. IntelliFlash provides continuous visual confi rmation of detector operation and compliance. Suited to a wide range of industrial applications including confi ned space entry, the GasAlertQuattro is fully compatible with BW’s MicroDock II automatic test and calibration system.
Rp.123
See Details
Multi Gas Detector – Honeywell GasAlertMax XT II
GasAlertMax XT II is the smart, simple, economical way to compliance. Workers feel safe and incidents are minimized so everyone will be able to do more. That means savings realized from business continuity and productivity. GasAlertMax XT II reliably monitors up to four hazards and combines straightforward one-button operation with our robust, motorized pump for intelligent, remote sampling, ideal for confined spaces. The GasAlertMax XT II is fully compatible with MicroDock II automated test and calibration system.
Rp.17.500.000
See Details
Flue Gas Analyzer - Testo 310
The new flue gas analyzer testo 310 combines simple functions with a high level of masurement accuracy, and is therefore perfectly suited to all basic measurements on a heating system. Long battery lifetimes of up to ten hours guarantee high availability. Its easy handling and compact design make the testo 310 a robust tool for day-to-day work – even when things get rough. Clear reports can be created as required on site thanks to the infrared interface printer specially developed for the testo 310.
Rp.123
See Details
Highly Efficient Flue Gas Analyzer – Testo 320
The new testo 320 is a high-quality measuring instrument for efficient flue gas analysis. Its wide measuring range makes it a reliable partner for eliminating malfunctions and emergencies, monitoring legal limit values or for daily routine work servicing heating systems. The numerous measurement menus of the testo 320 are clearly structured. Standarized menu procedures, which are stored in the instrument specifically for your country, simplify operation – depending on which standards you are dealing with.
Rp.123
See Details