Loop Calibrator - Fluke 705
The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops. It features : mA sourcing, simulation and measurement, 0.02% accuracy and 0.001 mA resolution, Simultaneous mA and % of span display, Selectable step or ramp outputs, 24 V Loop supply with mA measure, 0-28 VDC measurement to check Loop Voltage, Easy battery exchange without opening the case & Compact case with separate protective holster.
Rp.20.800.000
See Details
Multifunction Installation Testers - Megger MFT1721
This latest series of multifunction installation tester adds one to the nomenclture and vastly to the value of these testers. The range of 3 instruments are expressly for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.
Rp.123
See Details
Multi Function Testers - Kyoritsu KEW6016
The KEW 6016 multi function tester perform 10 function in one instrument :
Continuity Tester, Insulation Resistance Tester, Loop Impedance Tester, PSC Tester, PFC Tester, RCD Tester, Earth Tester, Phase Rotation Tester, Voltage Measurement and Frequency Measurement.
Continuity Tester, Insulation Resistance Tester, Loop Impedance Tester, PSC Tester, PFC Tester, RCD Tester, Earth Tester, Phase Rotation Tester, Voltage Measurement and Frequency Measurement.
Rp.123
See Details
DC Hipot Testing 30kV Insulation Tester - Megger MIT30
The Megger MIT30 is a portable 30-kV insulation tester that has been developed to undertake tests on UST (ungrounded test samples). It satisfies the demand for a
variety of high voltage, high accuracy, and low current applications. The MIT30 CANNOT be used on grounded/earthed test samples. Otherwise, the unit will be damaged. The MIT30 has a test current of up to 330 μA, and userselectable
trip levels from 0 to 360 μA. The MIT30 provides protection to the test piece against flashovers (arcing) and further damage in the event of a breakdown.
variety of high voltage, high accuracy, and low current applications. The MIT30 CANNOT be used on grounded/earthed test samples. Otherwise, the unit will be damaged. The MIT30 has a test current of up to 330 μA, and userselectable
trip levels from 0 to 360 μA. The MIT30 provides protection to the test piece against flashovers (arcing) and further damage in the event of a breakdown.
Rp.123
See Details
Cable Tester - Megger VLF Sine Wave 45kV
The VLF sine wave 45 kV with integrated tanDelta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables.
The 45 kV tester is a multifunctional tool: apart from VLF and DC testing, it also performs sheath testing and sheath fault pinpointing (in combination with the step voltage probe ESG NT). Moreover, the optional internal tanDelta expands the system to assess both cable integrity and condition.
The 45 kV tester is a multifunctional tool: apart from VLF and DC testing, it also performs sheath testing and sheath fault pinpointing (in combination with the step voltage probe ESG NT). Moreover, the optional internal tanDelta expands the system to assess both cable integrity and condition.
Rp.123
See Details
Cable Tester - Megger VLF Sine Wave 34kV
The VLF sine wave 34 kV is a compact, robust and portable VLF sine wave test system for medium voltage cables. The design, optimized for rapid transportation and quick setup, and the continuous duty cycle are two attributes that qualify the system. As an ideal tool for routine cable testing. For both 0.1 Hz sine wave voltage tests and rectangular or DC voltage tests, the VLF sine wave 34 kV fills the highest demands on the test voltage quality and stability.
Rp.123
See Details
Multifunction Transformer and Substation Test System - Megger TRAX 280
TRAX is not just another multi-functional test instrument, but rather many intelligent instruments built into one box. The software includes a number of apps, making it fast and easy to perform a large range of different tests. The hardware offers unmatched flexibility and the range of cables and accessories adds even more flexibility, making the TRAX an efficient and time saving system for any user in the world.
Rp.123
See Details
CAT IV Insulation Testers - Megger MIT400-2 Series
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance etc. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry standard 10-20%. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.
Rp.19.700.000
See Details
2 kV High Voltage Amplifier - Megger VAX020
VAX 020 expands the IDAX test voltage range from 200 V to 2 kV. This improves the capability to perform accurate measurements in extreme high interference environments e.g. HVDC substations. Besides 50/60 Hz capacitance and dissipation factor (power factor) measurements, the application gives valuable information about the general condition of any high voltage insulation by measuring its dielectric response. The technique is also capable of assessing the moisture content in oil/paper insulation systems.
Rp.123
See Details
Insulation Tester - Hioki ST5520
The Hioki electrical safety testers are designed for insulation resistance and voltage withstand testing of electrical devices and components according to various safety standards. The ST5520 is the fastest insulation testers in the industry, delivering pass/fail assessment in as fast as 50 ms. 25 to 1000 V test voltage with 1 V resolution.
Rp.23.400.000
See Details
Leak Current HiTester - Hioki ST5541
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from computers to medical equipment. The ST5541 provides support for standard-compliant networks (excluding medical-use electrical devices).
Rp.69.500.000
See Details
High Voltage Insulation Tester - Hioki IR3455
Hioki insulation resistance testers or megohmmeters feature all-in-one designs including built-in rugged cases and test lead storage compartments. The IR3455 is a 5-range, 250V to 5000V digital insulation resistance tester offering up to 10TΩ of insulated resistance testing. High performance features include bargraph, built-in memory, leak current and voltage testing, and DAR and PI calculation capabilities to help shorten work time associated with field insulation testing.
Rp.40.200.000
See Details