4-Wire Earth Ground Resistance Tester – Extech GRT300
The GRT300 measures earth ground in 4 ranges from 2 to 2000 Ohm. 4-wire, 3-wire, and 2-wire testing. Large dual line LCD. Automatic I (current) and P (potential) spike check. Test Hold function for easy operation. Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off. AC Earth Voltage. Overrange and low battery indication. Complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, and eight 1.5V AA batteries
Rp.25.700.000
See Details
4-Wire Earth Ground Resistance Tester – Extech GRT300 NIST Certificate Calibration
The GRT300 measures earth ground in 4 ranges from 2 to 2000 Ohm. 4-wire, 3-wire, and 2-wire testing. Large dual line LCD. Automatic I (current) and P (potential) spike check. Test Hold function for easy operation. Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off. AC Earth Voltage. Overrange and low battery indication. Complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, and eight 1.5V AA batteries
Rp.42.300.000
See Details
4-Wire Earth Ground Resistance-Resistivity Tester – Extech GRT350
The GRT350 is a 4-wire earth ground resistance and resistivity tester which measures earth ground resistance from 2 to 2000 Ohm and resistivity from 0.06 to 628 ohm-m. The GRT350 supports 4-wire, 3-wire, and 2-wire testing. This tester has a large dual line LCD, automatic spike check, test hold function, auto ranging, data hold and auto power off. The GRT350 can also store and recall up to 200 test results, has over-range and low battery indications. Product is complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, user's manual and eight 1.5V AA batteries. CE certified with a CAT IV 300V safety rating
Rp.35.700.000
See Details
4-Wire Earth Ground Resistance-Resistivity Tester – Extech GRT350 NIST Certificate Calibration
The GRT350 is a 4-wire earth ground resistance and resistivity tester which measures earth ground resistance from 2 to 2000 Ohm and resistivity from 0.06 to 628 ohm-m. The GRT350 supports 4-wire, 3-wire, and 2-wire testing. This tester has a large dual line LCD, automatic spike check, test hold function, auto ranging, data hold and auto power off. The GRT350 can also store and recall up to 200 test results, has over-range and low battery indications. Product is complete with test leads with alligator clips, 4 auxiliary earth bars, hard carrying case, user's manual and eight 1.5V AA batteries. CE certified with a CAT IV 300V safety rating
Rp.42.300.000
See Details
Power & Energy Calibrator – Meatest M133C
M133C is electric AC/DC power and energy calibrator for calibration of power meters, power transducers, power quality analysers and generally all kinds of power measuring devices. AC voltage, current, power and energy functions have calibrated phase shift in frequency range from 15 Hz to 1 kHz with resolution as good as 0.001 Hz. Simulated electric power (including power quality functions) can be set independently in each phase of both voltage and current signals. Built-in 5½ process multimeter for transducer calibration is standard part of every M133C calibrator
Rp.123
See Details
Multifunction Calibrator – Meatest M140
Multifunction calibrator M140 is calibrator – tester for use in calibration laboratories as an electrical standard of voltage, current, resistance, capacity and frequency. Load capacity of the voltage output is 30 mA - enough for most high-consumption analogue power-meters. Installed harmonic and non-harmonic shape signals allow for testing meter sensitivity to distorted signals by a signal with various crest factor. Frequency modes, suitable for calibration of multimeters and time bases of oscilloscopes, have adjustable 6-digit frequency, amplitude and duty ratio of the output signal. The calibrator can measure temperature with TC and RTD temperature sensors to show it on display or use for cold junction compensation
Rp.123
See Details
Multifunction Calibrator – Meatest M142
Multifunction calibrator M142 is calibrator of electric quantities for application in calibration laboratories and in production lines where voltage, current, resistance, capacity and frequency meters are manufactured. Load capacity of the voltage output is 30 mA - enough for most high-consumption analogue power-meters. Installed harmonic and non-harmonic shape signals allow for testing meter sensitivity to distorted signals by a signal with various crest factor. Frequency modes, suitable for calibration of multimeters and time bases of oscilloscopes, have adjustable 6-digit frequency, amplitude and duty ratio of the output signal. The calibrator can measure temperature with TC and RTD temperature sensors to show it on display or use for cold junction compensation
Rp.123
See Details
Multifunction Calibrator – Meatest M143
M143 Portable multifunction calibrator is cost saving solution for calibration of meters of electric quantities up to 1000 V and 20 A. Basic accuracy of 60 ppm in DC voltage is more than enough for calibration of 3½ and 4½ digit multimeters. Resistance function is covered by eight fix resistors in range from 10 Ω to 100 MΩ, other features are TC temperature sensor simulation and optionally RTD temperature sensor simulation. Thanks to its small dimensions and low weight the calibrator is ideal for field calibrations
Rp.123
See Details
High Current Calibrator – Meatest M151
M151 Current Calibrator can generate up to 120 A with one year accuracy ranging from 0.035% to 0.11% at all points. Key signal parameters including selected function, uncertainty and AC signal frequency are shown on large LCD, softkeys under the display are linked to frequently used functions for quick setup
Rp.123
See Details
Precision DC Calibrator – Meatest M160
Precision DC calibrator M160 is a portable source of industrial process signals for calibration of multimeters in laboratories as well as on site calibration of evaluation units and other process meters. High load capacity of both voltage and current outputs, robust design and exceptional 20 ppm accuracy over 20°C-wide reference temperature range make this calibrator great for demanding conditions in production facilities. Other functions include thermocouple and RTD simulation, resistance and frequency, all with accuracy and resolution to meet all requirements. With option 91 the calibrator can measure temperature directly at output terminals and compensate the cold junction effect
Rp.123
See Details
High Resistance Decade - Meatest M194
M194 High Resistance Decade is designed for calibration of insulation testers, megaohmmeters and resistance ranges of safety testers, HIPOT testers or any other DC high resistance meter with test voltage up to 6 kV. Apart from resistance source in continuous range from 10 kΩ to 100 GΩ, the M194 has built-in multimeter indicating either test voltage in resistance function or mA current in short function for testing of UUT's short current
Rp.123
See Details
Device Communicator – Emerson AMS Trex C-H-P-KL-9-S1
Improve reliability with the AMS Trex Device Communicator. Increase productivity in the field with your Trex unit by doing more types of tasks. Easily solve complex device issues without the need for other specialized tools. The Trex communicator is designed to withstand the harsh conditions in and around manufacturing facilities and is safely-rated, so it can go anywhere you can go. Rely on Trex to deliver results and keep your field assets reliable
Rp.178.300.000
See Details