Fluke 719Pro Electric Pressure Calibrator provides pressure calibration at your fingertips. Use the programmable pump limit settings to eliminate over-pressurization, and to set “pump to” pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more making it the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges
Measurement range : -12 to 300 psi Resolution : 0.01 psi Accuracy : ±0.025% of full scale, 6 months Temperature effect (all ranges) : Add ±0.002% F.S./°C for temps outside of 15°C to 35°C mA DC (simulation and measurement) : 0-24 mA DC Resolution : 0.001 mA Accuracy : ±0.015% of reading ±2 counts Volts DC (measurement only) : 30 V DC Resolution : 0.001 V Accuracy : ±0.015% of reading ±2 counts Temperature (measurement only, Pt100 RTD) : -50 to 150°C Resolution : 0.01°C Accuracy : ±0.1°C Loop power supply : 24 V DC Operating temperature : -10°C to +50°C Storage temperature (with batteries) : Per battery manufacturer's specification within storage specification below Storage temperature (without batteries) : -20°C to +60°C Battery : Eight (8) standard Alkaline AA batteries Battery life : 300 pump cycles to 150 psi minimum; 1000 pump cycles to 30 psi; 100 pump cycles to 300 psi minimum Engineering Units (Configurable) : psi, bar, mbar, kPa, kgcm2, cmH2O @ 4°C, cmH2O @ 20°C, mH2O @ 4°C, mH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C, ftH2O @ 4°C, ftH2O @ 20°C, ftH2O @ 60°F Dimensions (H x W x D) : 24.13 x 11.18 x 7 cm (9.5 x 4.4 x 2.8 in) Weight : With holster 1.2 kg (2.5 lb)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)