Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field
Measurement range : -12 psi to 100 psi Accuracy : 0.025% full scale Resolution : 0.01 psi, 0.1 mbar, 0.01 kPa Over pressure : 2 x full scale mA Measure Range : 0 to 24 mA Resolution : 0.001 mA Accuracy : 0.015% + 1 count Loop power Range : 24 V DC Accuracy : ±10% Maximum voltage : 30 volts (non-operating) Temperature : -40°C to 60°C Operating temperature : -10°C to 55°C Relative humidity : 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C) Operating altitude : 3,000 M max Shock : 1 M drop test Vibration : Random, 2 g, 5 Hz – 500 Hz Safety : CSA C22.2 No. 1010.1: 1992 EMC : EN50082-1: 1992 and EN55022: 1994 Class B Power, battery life : 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 Battery life : 4 to 20 hours typical, depending on functions used Display : LCD, 5 digit pressure and current simultaneous Size : 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) Weight : 992 g (35 oz)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)