Fluke 719 Electric Pressure Calibrator provides pressure calibration at your fingertips. Use the programmable pump limit settings to eliminate over-pressurization, and to set “pump to” pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals. The Fluke 719 delivers pressure calibration made easy, by a name you know and trust for all your process calibration needs
Measurement range : -12 to 36 psi Accuracy : 0.025% range for 6 months Resolution : 0.001 psi, 0.1 mbar mA Range : 0 to 24 mA Resolution : 0.001 mA Accuracy : 0.015% Rdg + 2 counts Storage temperature : -30°C to 60°C Operating temperature : -10°C to 55°C Relative humidity : 95% (-10°C to 30°C) Shock : 1 meter drop test Safety : CSA C22.2 No. 1010.1:1992 EMC : EN50082-1:1992 and EN55022:1994 Class B Pump Specifications Maximum pressure generation : 120 psi (8 BAR) (100 psi model) Pump to : 30 psi in less than 15 seconds, 100 psi in less than 45 seconds (with 1 meter of 1/8 inch test hose) Pump cycles between rebuilds : 5000 Total pump life : 20,000 calibration cycle Battery : Two 9 V alkaline batteries Battery life : 12 hours with 12 mA into 500 Ω, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi Size (H x W x L) : 60 x 87 x 210 mm Weight : 912 g (2 lb)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)