In order to provide an optimal solution for each application, a wide variety of pressure sensors are available. With an accuracy of 0.025% and pressure ranges up to 6,000 bar, all are quickly and easily interchangeable without the need for additional tools. In addition to being mounted on the instrument, the pressure sensor can also be mounted remotely using an extension cable (approximately 1 m long). If the pressure sensor is changed, the instrument automatically recognises the new measuring range and thus the operator does not need to reconfigure it manually
Type of pressure : {In addition to the above-specified pressures; vacuum, bi-directional ranges and absolute pressures are available}; {bi-directional ranges (±): minimum span 500 mbar, e.g. -250 mbar ... +250 mbar} Pressure units : 15 standard units and one freely programmable unit; see page 4, menu structure Digital instrument with easily interchangeable reference pressure sensors (sensor can also be attached externally) Measuring ranges from 0 ... 250 mbar to 0 ... 6.000 bar Accuracy: 0.025 % (incl. calibration certificate) Calibration and pressure-switch test functions PC software and complete service cases (incl. pumps) available Display : Large TFT colour screen for the display of reference and test signals, and additional information Display resolution : up to 6 digits; selectable Measuring rate (pressure) : 2 values/sec
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
Fluke 721Ex Precision Pressure Calibrator is the ideal tool for gas custody transfer applications. It features dual isolated pressure sensors to allow you to take simultaneous static and differential pressure measurements with a single tool. And it can be configured by selecting either a 16 psi (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then adding any of seven high pressure ranges: 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)