The Hach QBD1200 TOC Analyser takes the pain out of your TOC analysis by dramatically simplifying the setup process, improving reliability of your results, and reducing overall cost of ownership. The QBD1200 has 95% less carryover. Inconsistent results? Trust 2% standard deviation at 50 ppm and 3% at 100 ppb.
Accuracy : ± 2 % Calibration Interval : 1 Year; Time to Calibrate 90 Minutes Calibration Method : Automated Routine: 18 Point Calibration Using KHP (6 Concentrations, 3 Replicates Each) Carrier Gas Options : CO₂ free Air, O₂, or N₂ Compliance Certifications : ISO 8245 and DIN EN 1484; USP <643> (including sterile water SST), JP-16 <2.59>, EP <2.2.44>, IP, CP, KP, US EPA 415.3 and Standard Method 5310c Data Export : PDF, CSV Dimensions (H x W x D ): 410 mm x 320 mm x 507 mm Display Type : 10.4 inch high-res colour touch screen Inorganic Carbon Handling : No extra Inorgainc Carbon Removal Module needed Overload Recovery : 1 Measurement Oxidation Method : UV lamp + Hot Persulfate Particle Size : up to 100 µm Power requirements (Hz) : 47 - 63 Hz Power requirements (Voltage) : 100/240 VAC Precision : 3% or 3ppb, whichever is greater Range : 0.4 ppb - 100 ppm Sample homogenisation : Available with Autosampler Sample to Sample Carryover : <0.2%
Thermo Scientific™ Orion™ AquaMate™ 7100 Visible and 8100 UV-Visible Spectrophotometers are designed to meet the specific needs of water and waste water analysis laboratories. Spectrophotometers include over 260 preprogrammed methods for easy and convenient measurements using Thermo Scientific™ Orion™ AQUAfast™, Merck, and CHEMetrics reagents. All preprogrammed methods are preloaded on the included USB memory stick to allow operators to add or remove methods as desired. Custom methods using the standard curve function can be uploaded through the USB, making it possible for most colorimetric reagents to be used. Making it possible for most colorimetric reagents to be used.
Thermo Scientific™ Orion™ AquaMate™ 7100 Visible and 8100 UV-Visible Spectrophotometers are designed to meet the specific needs of water and waste water analysis laboratories. Spectrophotometers include over 260 preprogrammed methods for easy and convenient measurements using Thermo Scientific™ Orion™ AQUAfast™, Merck, and CHEMetrics reagents. All preprogrammed methods are preloaded on the included USB memory stick to allow operators to add or remove methods as desired. Custom methods using the standard curve function can be uploaded through the USB, making it possible for most colorimetric reagents to be used. Making it possible for most colorimetric reagents to be used.
The XD series instruments are ideal for routine and spectral analy sis. As true all-rounders, the XD 7000 and XD 7500 facilitate work rou tines, especially with automatic method recognition using barcodes, automatic cell recognition and more than 150 pre-programmed meth ods. In addition to analytical quality control, they also support Good Labor Practice (GLP). The instruments are available together with bar-coded test tubes and a wide range of accessories from a single source - which is also easy on your wallet. High-quality reference beam optics, usability, easy handling and multilingual global applica bility round off the versatility of the VIS and UV/VIS spectrophotome ters, which are also equipped for flexible on-site use