Product
Benchtop Wastewater Multiparameter (with COD) Photometer – Hanna Hi83314-01
Hi83314 is a compact, multiparameter photometer for measuring key water and wastewater quality parameters. The meter is one of the most advanced photometers available with an innovative optical design that utilizes a reference detector and focusing lens to eliminate errors from changes in the light source and from imperfections in the glass cuvette. The Hi83314 also offers an absorbance measurement mode for performance verification and for users that would like to develop their own concentration versus absorbance curves
Rp.42.000.000
See Details
Portable Conductivity Meter – Metrohm 912
Portable single-channel conductivity measuring instrument for measuring conductivity/TDS/salinity and temperature. You will be optimally equipped for measurements in the field with this battery-operated measuring instrument. The 912 Conductometer is equipped with a measuring input for conductivity, TDS, salinity, and temperature
Rp.123
See Details
Portable Ph Meter – Metrohm 913
Portable two-channel pH measuring instrument for measuring pH/mV and temperature. You will be optimally equipped for measurements in the field with this battery-operated measuring instrument. With the 913 pH Meter, you can measue two pH values and two temperature values simultaneously. Two separate measuring inputs are available here as well
Rp.123
See Details
Portable Ph and Conductivity Meter – Metrohm 914
Portable two-channel pH / conductivity measuring instrument with intelligent measuring input for measuring pH/mV / conductivity / TDS / salinity and temperature. You will be optimally equipped for measurements in the field with this battery-operated measuring instrument. As a result of the two separate measuring inputs, conductivity and pH value can be measured in parallel, even in the same beaker
Rp.123
See Details
Portable Multiparameter Turbidity and Ion Specific Meter – Hanna Hi93102
The HI93102 is a portable multiparameter meter that measures turbidity, free and total chlorine, cyanuric acid, pH, iodine, bromine, and low range iron. This meter combines accuracy and ease of use in an ergonomic, portable design. A user can accurately determine the turbidity after calibration with AMCO-AEPA-1 standards; determination of free chlorine, total chlorine, cyanuric acid, pH, iodine, bromine, and low range iron is reliable and consistent with the use of ready made reagents
Rp.43.800.000
See Details
Portable Chlorine Free Photometer - Hanna Hi96711
The HI96711 Free and Total Chlorine Portable Photometer combines accuracy and ease of use in an ergonomic, portable design. A user can accurately determine the concentration of free and total chlorine in a variety of water samples within a 0.00 to 5.00 mg/L (ppm) range using ready made reagents. The HI93701-0 reagents are used for free chlorine and the the HI93711-0 are used for total chlorine measurements. The HI96711 offers many advanced features including the exclusive CAL Check™ function used for performance verification and calibration of the meter.
Rp.11.400.000
See Details
Portable Free Chlorine Ultra High Range Photometer - Hanna Hi96771
The HI96771 Ultra High Range Chlorine Portable Photometer combines accuracy and ease of use in an ergonomic, portable design. A user can accurately determine the concentration of chlorine over two ranges. The HI96771 has a 0.00 to 5.00 mg/L (ppm) free chlorine low range and a high range mode that measures chlorine up to 500 mg/L (ppm). The HI93701-0 reagents are used for the low range free chlorine measurement while the HI95771-0 are used for high range chlorine measurements. The HI96771 offers many advanced features including the exclusive CAL Check™ function used for performance verification and calibration of the meter.
Rp.10.600.000
See Details
Portable TDS Meter - Hanna Hi8734
The HI8734 is a rugged, portable TDS meter designed for use in a wide variety of environmental conditions. It is supplied with a four-ring conductivity probe to allow for three ranges of measurement. TDS readings are adjusted with manual temperature compensation, assuring users of consistent and accurate measurements of total dissolved solids.
Rp.18.500.000
See Details
Portable PH/EC/TDS/Temp Meter - Hanna Hi9812-5
The HI9812-5 is an economical, wateproof, portable meter that measures pH, conductivity (EC), total dissolved solids (TDS) and temperature (°C) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9812-5 is most suitable for agricultural, greenhouse and hydroponic applications.
Rp.8.500.000
See Details
PH Tester – Hanna Hi98106
The HI-98106 Champ® revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement. This pocket sized pH tester is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry. With a renewable cloth junction, the HI-98106 Champ® has an extended life over typical pH testers.
Rp.2.800.000
See Details
PH Tester – Hanna Hi98107
The Hanna Instruments HI98107 pHep® pH tester is a rugged and reliable pocket-sized tester for use in the lab or field. This modern looking meter is only 0.7" thick and extremely ergonomic, fitting comfortably in your hand. The pH electrode uses a unique reference cell design that utilizes an extractable cloth junction. A clogged junction will typically exhibit erratic readings that will not stabilize. Simply extracting a small portion of cloth from the meter will clear any clog by exposing a fresh, clean surface. The ability to clear any clogging will extend the life of the pH electrode.
Rp.2.800.000
See Details
PH Tester – Hanna Hi98108
The HI98108 pHep+® pH tester provides high accuracy measurements in a rugged pocket-sized design. The simple two-button operation provides one button for ON/OFF, the other for calibration. Being lightweight and only 0.7" thick, the pHep+ is extremely ergonomic and fits comfortably in your hand. The pH electrode uses a unique reference cell design that utilizes an extractable cloth junction. A clogged junction will typically exhibit erratic readings that will not stabilize. Simply extracting a small portion of cloth from the meter will clear any clog by exposing a fresh, clean surface. The ability to clear any clogging will extend the life of the pH electrode.
Rp.3.200.000
See Details