The Hi96710 portable photometer is for the measurement of pH, free chlorine, and total chlorine. Hanna's portable photometers feature an advanced optical system; the combination of a special tungsten lamp, a narrow band interference filter, and silicon photodetector ensure accurate photometric readings every time. The Hanna exclusive CAL Check™ feature utilizes ready-made, NIST traceable standards to verify both meter validation and calibration. The exclusive cuvette locking system ensures that the cuvette is inserted into the measurement cell in the same position every time to maintain a consistent path length
Range : pH (P1): 6.5 to 8.5 pH; Free & Total Chlorine (P2 & P3): 0.00 to 5.00 mg/L (ppm) Resolution : pH (P1): 0.1 pH; Free & Total Chlorine (P2 & P3): 0.01 mg/L under 3.50 mg/L; 0.10 mg/L above 3.50 mg/L Accuracy @ 25°C (77°F) : pH (P1): ±0.1 pH; Free & Total Chlorine (P2 & P3): ±0.03 mg/L (ppm) ±3% of reading Method : pH (P1): phenol red method; Free & Total Chlorine (P2 & P3): adaptation of the USEPA method 330.5 Auto-off : after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder Environment : 0 to 50°C (32 to 122°F); RH max 95% non-condensing Battery type : 9V battery Dimensions : 193 x 104 x 69 mm (7.6 x 4.1 x 2.7”) Weight : 360g (12.7oz.)
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our compact and powerful benchtop model was developed to provide simplicity with excellent on-site usability.
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our compact and powerful benchtop model was developed to provide simplicity with excellent on-site usability.
Water quality analysis is repeatedly performed in laboratories on a daily basis. Our compact and powerful benchtop model was developed to provide simplicity with excellent on-site usability.